Audiovox PROV 710 P Manuale Utente Scaricare il pdf (Pagina 10)

Troubleshooting:

SYMPTOM:

No power at Video Monitor

Power but no video or

sound

Picture, but no sound

No Infrared remote func-

tions for VCP (or other com-

ponents)

REMEDY:

-Verify +12 VDC on Red wire at 2 pin Power Harness behind video monitor.

Verify ground connection with continuity test from known good ground to

black wire at 2 pin Power Harness

-Verify that the correct source is selected (i.e.:1,2,3 or 4). Verify that the

source is on and playing a known good media (such as a DVD or video-

tape). Verify connections at both ends of the source component harness.

- Verify all connections per the wiring diagram on page 6 .

-Check batteries in the hand held remote. Verify that the IR LED ( page 6

Wiring Diagram) is properly attached to the sensor window of the VCP (or

other component).

Negative Switched Dome lighting

To 12 pin

connector

constant

Factory Door ajar

switch or Body

Factory Dome light circuit

Red / black - Lamp on

Black / red - Lamp common

Violet / brown - Lamp Auto

-8-

1 2 ... 5 6 7 8 9 10 11 12

Nessun commento

Audiovox PROV 710 P Manuale Utente Pagina 10